bfi_banner-08-11_tp

Search Catalog
      GO   
 All Categories    Series i-8500 Institutional Security Detention Grade Non-Handed Precision Engineered High Capacity Hinge
All Categories > Hinges > Series - i > Series i-8500 Institutional Security Detention Grade Non-Handed Precision Engineered High Capacity Hinge > View Items  

Series i-8500 Institutional Security Detention Grade Non-Handed Precision Engineered High Capacity Hinge

Check up to five results to perform an action.


The barrel and leaf sections of the hinge are fabricated from 1018 cold rolled steel and joined with welds of x-ray quality. The I-8500 is then machined to precise tolerances; allowing precision bearings and hinge pin components to be used which significantly reduce wear and friction. The results: a reliable hinge that will allow doors weighing several hundred pounds to be operated by the touch of a finger.

The SERIES i-8500 comes in two capacities:

Model numbers i-8505 through i-8508 have been designed and tested to support thrust loads or doors weighing up to 800 pounds. For those detention grade applications, they meet or exceed ASTM F1758 Grade 1 and are FBOP approved. They feature self-lubricating, maintenance free, radial and thrust bearings which have PV ratings as high as 28000 psi x fpm. A precision, ground stainless steel, maximum security hinge pin is welded in place.

Model numbers i-8510 through i-8513 are rated for thrust loads or doors weighing up to 2000 pounds. They feature anti-friction needle roller bearings to transfer the higher radial and thrust loads and a hardened, precision ground, alloy steel pin. The hinge pin is also Armoloy® coated for additional corrosion protection.  Oil seals are provided to protect the hinge internals in more severe environments while lubrication holes allow for periodic greasing.

To improve corrosion protection on all i-8500 models, we offer zinc plating or fabrication in stainless steel as an option.

When ordering: specify with or without mounting holes and type of standard offset.

Series i-8500 hinges can also be supplied with the following modifications: custom mounting hole layouts, shorter or longer hinge leafs and custom offsets.




Search Items



    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
Compare Items
   
  Results 1 - 8 of 8 1 

Item #

Item Name

Thrust Capacity (Door Weight)

Radial Capacity

Operating Torque *

i-8513 Full Mortise 2000 lbs. 800 lbs. 5 lbs. in.
i-8510 Full Surface 2000 lbs. 800 lbs. 5 lbs. in.
i-8512 Gap Mounted 2000 lbs. 800 lbs. 5 lbs. in.
i-8511 Half Surface/Mortise 2000 lbs. 800 lbs. 5 lbs. in.
i-8508 Full Mortise 800 lbs. 320 lbs. 50 lbs. in.
i-8505 Full Surface 800 lbs. 320 lbs. 50 lbs. in.
i-8507 Gap Mounted 800 lbs. 320 lbs. 50 lbs. in.
i-8506 Half Mortise/Half Surface 800 lbs. 320 lbs. 50 lbs. in.
  Results 1 - 8 of 8 1 
Privacy Policy : Terms and Conditions : Declaration of Conformity : Hinge Warranty : Declaration of Hinge Capacities



View and insert CAD Blocks


99 West Hillside Ave.
Thomaston, CT 06787
P: 860-283-6211
F: 860-283-6123